Start here
If you're new to DMA, read this one first, it links everything else in order.
Start with a main PC, a second computer, a DMA card, firmware and software. See how each part works, how DMA differs from a software cheat, what it costs and the setup order.
Guides
Step by step, for when you are building or fixing something.
DMA basics
A DMA card works in a desktop from around 2020 or newer with a free PCIe slot, if we have firmware for your game. Use these five checks to see what to buy.
Games
What the public view counter means, which game profiles work, and how view orders are tracked.
Hardware
What each port, light and switch on the GODLIKE 100T DMA card does, which cable goes where, and what the lights tell you when your card isn't working.
Find your motherboard model, chipset and Intel or AMD CPU generation in Windows, even on a Dell, HP or Lenovo, and see which DMA firmware fits.
MAKCU
Fix a MAKCU with no COM port, a mouse that won't pass through, software that can't connect, the wrong baud rate or a USB sound that keeps looping.
Update MAKCU to v4 with the free MAKCU Toolkit. Check each cable's port, use Repair flash for v3 and find the fix if your update stops.
Wire MAKCU to your mouse and both computers, install the CH343 driver, find its COM port and set the speed. Nothing goes on your main PC.
FERRUM
The Ferrum Utility only runs on Windows, but FERRUM still works on a Linux second PC over its CP2102 port at 115200 baud with basic KMBox B+ Pro commands.
If your mouse won't work through FERRUM, your software can't move it, you see Backend Status: Disconnected or clicks land too early, follow these checks in order on your second PC.
If your mouse doesn't pass through FERRUM or your board is missing in the Ferrum Utility, find the bad USB-C cable on your second PC with a device that works.
How to install an older Ferrum Utility version from the Misc tab on your second PC, and why you should stay on the latest unless we ask you to roll back.
How to update the Ferrum Utility from its Misc tab on your second PC, what happens to FERRUM's firmware, and what to do if your board was unplugged.
Which FERRUM connection your DMA software needs, where to find the COM port or the Net IP and port in the Ferrum Utility, and the settings that trip people up.
Fix MewTools errors for MAKCU and FERRUM: device not found, COM port 10 or higher, a busy port, a mouse that won't move or a failed MAKCU flash.
How to wire FERRUM's three ports, install the CP210x driver and the Ferrum Utility on your second PC, pick mouse or keyboard and find your COM port.
Firmware
Where to get Mew Activator and your key, how to activate your firmware on your second PC, when to run it again, and fixes when it hangs or won't take your key.
MiTM and RDMA are keys you renew every 1, 3 or 6 months. What each one needs, when it runs out, how to renew and how the warranty works.
What to do after a ban or detection announcement, what undetected means, how to claim under warranty, what to do after a game update and why your activation key never runs out.
Check warranty lengths, how to claim a new device if your firmware is blocked or detected, hardware claims and the 65% and 40% upgrade credits.
Yes, if it's a 75T or 100T. Check your card's chip and ports, follow the setup steps, and see what we cover on hardware bought elsewhere.
Setup
Set up the Mew Mini PC as your DMA second PC. Which port your card's cable goes in, what to install with MewTools, and which fusers it drives.
Set up your DMA card, second PC, MAKCU or FERRUM and video fuser in the right order. Every cable, which port it goes in and the guide for each step.
Check your main PC for RTL8125, connect your two PCs through your router or with a direct cable, and get ready for your RDMA setup ticket.
Send your game over the network to OBS on your second PC, add your overlay, remove its black background and record or stream.
How to wire a capture card after your video fuser, so you can record or stream the game with your overlay on it, and what to check before you buy one.
No, your firmware stays on your card. What you redo when you change your main PC or second computer, reinstall Windows, or run more than one card.
What to do with your DMA card, what to back up and how to clean install Windows from a USB stick after booting with an unflashed card.
Turning Fast Boot off is the only BIOS change our DMA firmware needs. Find the BIOS key and Fast Boot menu for ASUS, MSI, Gigabyte, ASRock, Dell, HP and Lenovo.
Set up a GODLIKE video fuser for DMA, then fix no picture, a black screen in game, a wrong refresh rate or an overlay that won't show.
Plug your DMA card into your second computer, install the FTDI data driver with MewTools and run a speed test before any software goes on.
How to flash your DMA card's firmware with MewTools, our free app. It checks the file matches your chip and ends with a speed test.
How to get your DMA card's DNA ID with MewTools and save an msinfo32 report, then send both on your order page so we can build your firmware.
Save your BitLocker key, put your DMA card in or use a riser, plug in the JTAG cable, turn off Fast Boot and check your card shows up before you flash.
Troubleshooting
Fix RDMA that won't connect, stops after about 30 seconds with VMM INIT FAILED, runs slow or leaves your PC with no internet. Cold boot, power saving, ports and link speed.
Fix a black screen or No signal on a GODLIKE video fuser. Reset both PCs to 1080p at 60Hz, check the inputs, cables and modes, then fix a black screen when a game starts.
Fix crashes, freezes and blue screens with DMA firmware. Check your BIOS settings, Link State Power Management, shared lanes, your cable and your anti-cheats in order.
Fix freezing, stuttering, missing firmware or driver problems with your DMA card. Check stock Windows, BIOS updates, Wi-Fi and your motherboard in order.
Your DMA software needs Microsoft's Visual C++ runtime, and your second PC doesn't have it. Install it from Microsoft's own site, then restart.
Device Descriptor Request Failed means your second PC saw your DMA card but couldn't read it. It's usually the cable, the USB port or a stuck card.
Your DMA software can't find the FTDI file it uses to talk to the card. It's a file missing from the software's folder, not your card or your cable.
Your second PC reached the DMA card, but the card isn't linked to your main PC's slot. Cold boot, check the lights, reseat it and try another slot.
Black screen, a debug light that stays on, a boot loop or straight to the BIOS after you put in a DMA card. Find what you see and work down the fixes in order.
Where to find your 48 digit BitLocker recovery key after you put in a DMA card or change the BIOS, and what to do if you can't find it.
DRIVER_VERIFIER_DMA_VIOLATION is a blue screen with stop code 0xE6. How to check if your DMA card is the cause, and what to send us if it is.
USB To UART+JTAG under Other devices is your DMA card's JTAG port without its driver. Install the CH347 driver in MewTools and its dot turns green.
FTDI SuperSpeed-FIFO Bridge under Other devices means your DMA card's data driver isn't installed. You can install it from MewTools with one click.
Failed to initialize DMA means your software couldn't connect to your card. Restart both PCs, then check the data port, the FTDI driver and other programs.
A file is missing from your DMA software's folder and it couldn't download symbols either. Extract everything, check your antivirus and connection.
Your DMA software connected but can't find Windows in your main PC's memory. Check for TINY PCIe TLP, cold boot, then make a memory map.
Your DMA software couldn't read where your main PC's RAM sits, usually because the USB link is unstable. Check that link first, then see whether a memory map helps.
Your second PC can't reach your DMA card's data port. Check the cable is in the data port, then check the FTDI driver, other programs using the card, power and the USB port.
VMM INIT FAILED means your DMA software couldn't start reading your main PC. Check the log for TINY PCIe TLP, then work through the cold boot, cable, port and BIOS checks.
Your DMA software fell back to tiny, slow reads because your card can't read memory. The most common cause is a card that hasn't been activated, so check the activator first.
Find your DMA error by its exact text, like VMM INIT FAILED, Unable to locate valid DTB or TINY PCIe TLP, with what it means and how to fix it.
A DMA card tops out around 200 MB/s on USB 3. If yours is slower, the cause is usually the cable or USB port, so work through these six checks in order.
When DMA software won't open, won't log in or can't reach your card, check the runtimes, clock, driver, activator and antivirus on your second PC.
What a DMA memory map does, when errors such as "Unable to locate valid DTB" mean you need one, how to make mmap.txt for Blurred, and when to make a new file.
If Windows SmartScreen, Smart App Control or your antivirus stopped MewTools from opening, here's why and how to let it run on your second computer.
Find the fix for a card missing from Device Manager, VMM INIT FAILED, FT601 errors or a failing speed test. Start with a cold boot, then check the port, cable and slot.
MewTools
A healthy 100T on a rear USB 3 port does about 7,000 to 10,000 reads/s and 140 MB/s or more. What Speed and Throughput mean, and what to do if yours are low.
What each Windows Update and Defender switch in MewTools does, which one we recommend turning on and how to undo the changes.
Run Check everything in MewTools, then copy the summary into your ticket. It's the fastest way for us to help. Read what the report checks.
Some tools only open COM1 to COM9. How to move your MAKCU or your card's JTAG port to a free number below 10 in Device Manager.
MewTools installs your DMA card's FT601 driver and your MAKCU and FERRUM drivers from the maker's site. It also stops Windows Update swapping in older ones.
Set up MewTools on your second PC. Connect your card, install drivers, get its DNA ID, flash your firmware and run a speed test.
Every app and system code in MewTools: not running as admin, missing files, no internet, high ping, refresh rate, sleep and USB power saving.
Fixes for every MewTools setup pack and Optimizer error, MT-501 to MT-512, from failed downloads and restore points to tamper protection and Defender.
Fixes for every MewTools flashing error from MT-301 to MT-314, like picking the wrong file, firmware for another chip or a flash that failed.
Find the fix for MewTools driver codes, including missing FTDI, CH347 and CH343 drivers, failed downloads, Windows Update swaps and WinUSB for the JTAG port.
Every card error code in MewTools, from no DMA card found to a slow speed test, with what it means and the steps to fix it.
MewCapture
One Ethernet cable from your main PC directly to your second PC, no router. What to buy, how Windows sets it up, and how to keep your internet.
Install MewCapture on both PCs, pair them and add your overlay to a recording or stream without a capture card.
Buying and orders
Your firmware is usually ready about 2 hours after you send your DNA ID and msinfo32 report, 24 hours at most. What each wait is for, and what to do if it takes longer.
How to open a support ticket in our Discord, what to send so we can help right away, why a ticket gets closed and how long a reply takes.
Why checkout asks you to tick a box, why firmware and MiTM keys can't be cancelled once we start, and how EU buyers send hardware back within 14 days.
How checkout works, from your account and shipping to one discount code per order, bundle savings of 3 to 10% and how store balance is added and spent.
Waiting for payment, Being prepared, Being built, On its way, Delivered: what each order status means, how long it lasts and what you do next.
Pay through NOWPayments for the first time: choose your coin, exchange or wallet, cover the network fee and check what to do if you pay too little.
After you pay, we ship your DMA card with tracking. Send your DNA ID and msinfo32 report, get your firmware from your order page, and open a Discord ticket if you need help.
Account and community
Create your account, add an email after signing in with Discord, change your email or password, set up two-step sign-in or request account deletion.
Where to post a question, what details help you get an answer, which rules the site enforces, why links from new accounts wait, and how our Discord roles work.
Posts
Help deciding what to buy.
DMA basics
Yes, once your card is flashed. Without the activator your card reads nothing, the kill switch turns it off, and an unflashed card must never boot into Windows.
War Thunder moved to BattlEye in 2024, and all our DMA firmware supports it. Compare options for AMD and Intel, prices and bans.
Sea of Thieves uses Easy Anti-Cheat on PC. Compare our EAC firmware for AMD and Intel, prices, bans and software.
Roblox uses Hyperion, and all our DMA firmware supports it. Compare options for AMD and Intel, prices, bans and software.
Overwatch uses Blizzard's own anti-cheat, and all our DMA firmware supports it. Compare options for AMD and Intel, prices and bans.
Halo Infinite runs Easy Anti-Cheat on PC. Compare our EAC firmware for AMD and Intel, check prices, and read about bans and software.
Destiny 2 runs BattlEye, which all our DMA firmware supports. Compare prices and options for AMD and Intel, and read about bans and software.
What a DMA setup costs in 2026, the risk of bans and detection, and who DMA is and isn't for.
DMA means direct memory access. Read what it means in gaming, what DMA cards and DMA cheats do, and the other meanings of DMA.
How a DMA cheat works step by step, from the card and firmware to the second PC, software, fuser and aim device, and how anti-cheats look for DMA.
A DMA card won't lower your FPS in any way you'd notice. What a card, a video fuser and an aim device do to FPS and input lag, and what can slow your PC down.
IOMMU (VT-d or AMD-Vi) controls which memory a device can reach and can block a DMA card. See why VALORANT turns it on and which firmware works with it.
RDMA uses your main PC's RTL8125 Ethernet adapter and a second PC, with no DMA card. What you need, how it connects and which key to choose.
A plain-words glossary of DMA terms: FPGA, 75T and 100T, firmware, DNA ID, JTAG, FT601, IOMMU, fuser, MAKCU, KMBox, ESP, MiTM, RDMA, shared devices and more.
Yes, as your second computer with 4 cores, 8GB and a USB 3 port. A laptop has no slot for your card, so we don't recommend playing on one.
A DMA card reads your main PC through PCIe and sends data to a second computer. Learn how the card, firmware and software work together.
Yes, DMA can be detected. Read how anti-cheats scan your card, use IOMMU and watch your input, what games have said about DMA and what happens if your device gets hit.
A DMA card needs a second computer to run the software. Check which devices work, which don't, and the cheapest way to add one if you only own one PC.
Software cheats run on the PC you play on, while DMA runs the cheat on a second computer. Compare what changes, what stays the same, the costs and who shouldn't switch.
Every part of a DMA setup at today's prices. About $345 if you already own a spare PC, or about $700 from nothing with a fuser and MAKCU, software included.
Games
On an AMD main PC, VALORANT runs on RDMA, which needs no DMA card. Private and MiTM run Vanguard on Intel only. What to buy on Ryzen, and what your PC needs.
None of our DMA firmware works on FACEIT, MiTM included. What FACEIT asks your PC for, why we don't sell firmware for it, and what works for CS2 on VAC.
How to add public Tracker.gg and Fortnite Tracker profile views, choose an amount and track delivery in your dashboard.
WARDOGS uses Easy Anti-Cheat in Steam Early Access. Check our DMA firmware for AMD and Intel and Bulkhead's response to cheating.
Squad uses Easy Anti-Cheat. Compare our EAC firmware for AMD and Intel, prices, bans and what else you need.
League of Legends uses Riot Vanguard. Check which DMA firmware supports it, what works on AMD, IOMMU requirements, bans and setup costs.
Deadlock runs VAC, which all our DMA firmware supports. Compare the options for AMD and Intel, and read about VAC bans and software.
DayZ runs BattlEye, which all our DMA firmware supports. Compare prices and options for AMD and Intel, then read about bans and software.
All our DMA firmware supports Arma Reforger and BattlEye. Compare prices and CPU requirements, then choose based on the other games you play, including Arma 3 and DayZ.
Fortnite's false ban wave hit many players at once, including legit players. Read why it isn't a firmware detection, how to appeal, and how to get a replacement if you were caught.
Hunt: Showdown 1896 uses Easy Anti-Cheat. Check our DMA firmware for AMD and Intel and what Crytek's Fair Play Task Force means for you.
Dead by Daylight runs Easy Anti-Cheat and tested Denuvo Anti-Cheat on Steam in September 2026. Our Advanced, Premium and MiTM DMA firmware cover both.
THE FINALS uses Easy Anti-Cheat and Denuvo Anti-Cheat, and Embark is testing Elytra. Check which of our DMA firmware supports it on AMD or Intel.
Apex Legends left Easy Anti-Cheat for EA Javelin Anticheat on September 29, 2026. What changed, and why every MewDMA firmware runs it.
GTA Online has run BattlEye since September 2024, and FiveM is a separate platform. Every DMA firmware we sell supports both, on AMD or Intel.
Arena Breakout: Infinite uses Tencent's ACE, Anti-Cheat Expert, and actively targets DMA. See which of our firmware supports it and what to check before buying.
Why we tell customers to skip Fortnite Zero Build tournaments and ranked cups on DMA, why we think they might be a honeypot, and the unusual bug one of us encountered in a cup.
Call of Duty says MW4 won't send you enemies you can't see. Here's what server culling is, why most games went easy on it and what we think it does to ESP.
All our DMA firmware supports Delta Force's ACE. Read about the Secure Boot and TPM checks, DMA Shield, the banned hardware list and 10 year bans.
All our DMA firmware supports Marvel Rivals on AMD or Intel. Read about NetEase's anti-cheat, banned hardware list, device bans and macro checks.
Every DMA firmware we sell works on Battlefield 6 with Secure Boot and TPM 2.0 on. ESP, radar and aimbot in BF6, Javelin errors and what EA says about DMA.
All our DMA firmware supports Siege's BattlEye. Read how DMA cheating, no recoil and ESP work in R6, Ubisoft's recoil checks and Legend Division's requirements.
All our DMA firmware supports PUBG: Battlegrounds. Read about BattlEye, Zakynthos, Krafton's kernel anti-cheat and its 2026 plan, hardware bans and software.
All our DMA firmware supports Escape from Tarkov's BattlEye. Read about radar and loot ESP, bans, and the TPM and Secure Boot change Battlestate announced.
All our DMA firmware supports Black Ops 7 and Warzone. Read how DMA cheats, ESP and radar work in Call of Duty, and what to know about TPM, Secure Boot and Ricochet.
ARC Raiders uses Easy Anti-Cheat and Denuvo Anti-Cheat. Compare firmware for both on AMD and Intel, check loot ESP and ESP-only setups, and read how Embark handles bans.
All our DMA firmware supports CS2 on Valve's VAC servers. None supports FACEIT. Compare your options for AMD and Intel and see what to check when choosing software.
Rust uses Easy Anti-Cheat. Check DMA firmware for AMD and Intel, what ESP, radar and recoil control need, Secure server requirements and bans.
Fortnite runs Easy Anti-Cheat and BattlEye. Compare firmware for both on AMD and Intel, check aimbot and ESP with Blurred or Streck, and read about tournaments.
Private and MiTM run VALORANT on Intel, while RDMA runs it on AMD without a DMA card. Compare the options, Vanguard's IOMMU checks, DMA bans and triggerbots.
Check the anti-cheats used by VALORANT, Fortnite, Rust, CS2, Call of Duty and other games, and which of our DMA firmware supports each one.
Hardware
The best DMA card in 2026 has a 75T or 100T chip, a built-in JTAG port and USB 3.0. See the parts of a card, what it costs with firmware and how to set it up.
Choose a DMA video fuser for your monitor's HDMI or DisplayPort input, resolution and refresh rate. Compare GODLIKE models and plan the setup.
What a KMBox is, the difference between KMBox B+ Pro and KMBox Net, and how MAKCU and FERRUM compare as DMA aim devices. Which one your software needs.
Why a second-hand DICHEN fuser can make your ESP wobble, which fuser we pick instead, and how to check a DMA card's real chip with MewTools first.
We pick X870 on AMD and Z790 on Intel for DMA. B550 and some 850 boards give the most trouble. What every firmware needs, and what we do if yours fails.
A fuser is optional. Compare it with your monitor's second input, a spare monitor, a KVM switch or a capture card, and check what happens to your sound.
The 10th Gen fusers use HDMI, while the 4K Pro needs DisplayPort and real graphics. Check which used mini PCs fit each model and when you need an active adapter.
Compare GODLIKE 10th Gen HDMI, 10th Gen DP and 4K Pro video fusers, including inputs, outputs, supported display modes and cables.
MAKCU does the same job as FERRUM for $25 instead of $160. Polling rate, keyboards, drivers and ports side by side, and why we pick MAKCU for every game.
The kill switch cuts your DMA card's power so you don't have to open the case. Where it is on the GODLIKE 100T, and why you only switch it with your PC off.
The number on a DMA card is the size of its FPGA chip. What 35T, 75T and 100T mean, which ones our firmware runs on, and why the 100T is the one to buy.
Your DMA second PC needs 4 cores, 8GB of memory, Windows and a rear USB 3 port. Which used mini PCs to buy for $150 to $180 and which cable your card needs.
What your main PC needs for a DMA card, which PCIe slot to use, why slots share lanes with your M.2 drives, and why we don't recommend laptops.
MAKCU
Learn how MAKCU works, what its three ports do, its 1000 Hz limit and software compatibility. Compare it with FERRUM and KMBox, then follow setup.
FERRUM
FERRUM is an 8000 Hz aim device for DMA with KMBox B+ Pro support. Compare it with MAKCU and check how to connect and set it up through COM or Net.
Firmware
Most DMA firmware is pooled, even when it's sold as 1:1. What pooling means, why every provider does it, and how many people share each MewDMA firmware.
1:1 firmware means a device only you are on. Advanced, Private and Premium T1, T2 and T3 are shared, and MiTM is the only firmware where the device is yours alone.
Which of our DMA firmware runs on an AMD main PC, what changes for Vanguard and what your AMD board needs.
A detection on one device doesn't affect the others. Learn what a device is, what happens when we pull one, and how to check our status page.
Each Premium tier now runs on several devices at once. Find out how you're assigned to one, why we close sales before a device fills up, and what this means for you.
Every Premium tier supports the same games. A higher tier gets you fewer people per device (up to 50, 25 or 5), more work on it and, on T3, a longer warranty.
MiTM DMA firmware gives you your own device instead of a shared one. See how it works, when to pick it over our other firmware and what the keys cost.
Shared firmware makes other customers' cards look like the same device as yours. Read why their bans don't affect your card and why fewer people is better.
Pick DMA firmware by your game, CPU and budget. Advanced, Premium T1 to T3, Private, MiTM and RDMA compared on anti-cheats, sharing and warranty.
Software
ESP is a cheat that shows players and items through walls. What it means, ESP vs wallhack, how it works on a DMA setup, why it lags and how people get caught.
A triggerbot fires when your crosshair is on an enemy. Compare it with an aimbot, see how it works on DMA in VALORANT and CS2, and how it gets caught.
A DMA radar shows every player on a map from above, on a second screen or in a browser. Check what a web radar or radar-only setup needs, which PC runs it and which games people use it for.
DMA recoil control pulls your mouse against your gun's kick through an aim device. Compare it with a macro, check why no spread and silent aim aren't included, and work through the fixes.
A DMA aimbot runs on your second computer and moves your mouse through an aim device like MAKCU. See how aimlock and common settings work, and what to check when it stops working.
What PCILeech, LeechCore and MemProcFS are, who makes them, how DMA software uses them, and why their names show up in your DMA error messages.
What ESP, a radar, an aimbot, a triggerbot and recoil control do on DMA, and what each one needs, like a fuser, a second monitor or an aim device.
What anti-cheat behaviour detection looks at, which games say they use it, and what it means if your aim goes through a MAKCU or FERRUM.
We recommend Blurred for Fortnite, Call of Duty, Rust, ARC Raiders and GTA V, and Streck for Fortnite. Compare plans, setup requirements and who handles support.
DMA software runs on your second computer and turns the memory your card reads into ESP, a radar and aim. Where each part runs and what it can't do for you.
Setup
Our firmware only needs Fast Boot off. Leave Kernel DMA Protection, IOMMU, Secure Boot and TPM on. Use this guide to check each in Windows and find out which games need them.
MewTools
MewTools is our free Windows app for your second PC. It flashes 75T and 100T cards, gets your DNA ID, runs a speed test and installs your drivers.
MewCapture
MewCapture is our free Windows app for both your PCs. Your main PC sends the game, and your second PC adds your overlay and records or streams.
Buying and orders
The full list of parts for a DMA setup: a card, firmware, a second PC and software, plus an aim device for aim and a fuser for one screen. Lists for MiTM and RDMA too.
Crypto has no extra charge. Card payments through Stripe cost 10% more and are arranged in a Discord ticket. Read why, and how to buy and send crypto safely.
Account and community
A review is about something you bought from us, a vouch is about another member. Who can post each, the limits, Discord vouches, and what makes a review useful.
How rank points work on MewDMA: what earns points, what Comet rank gets you, why helping counts for more than spending and how you lose them.
