Skip to content
1 / 4
DMA CardsBuilt by GODLIKE

GODLIKE 100T DMA Card

GODLIKE 100T DMA card with a PCIe x1 connection and USB-C data link to your second PC. Firmware is sold separately.

$125.00
In stock
1

To pay by card or anything other than crypto, open a ticket in our Discord. Card checkout on the site is coming in the next few months.

Free shipping
Out in 1–2 days, arrives in 7–10 working days
3-month warranty
Replaced if faulty
Tested
Checked before it ships
Build a bundle
0 of 4 parts
0% off3% off5% off10% off

Four parts chosen together take 10% off all four, and this one can start it.

Edit

What this is

The GODLIKE 100T goes in your main PC and gives your second computer a path to its memory over PCIe. It's the biggest of the three Artix-7 sizes. The larger chip fits more code, giving you better firmware now and room for future firmware. Our "Why the 100T" post explains the number.

What it does

  • Goes in a free PCIe slot in your main PC.
    It's an x1 card, so it fits an x1, x4, x8 or x16 slot, and Your Main PC says which slot to pick and why.
  • Links to your second computer over USB-C.
    Your software runs on that computer. Your Second Computer covers the requirements.
  • Runs whatever firmware you put on it.
    It ships with factory firmware, which isn't what you run. Firmware is a separate purchase you can make with your card or after. You flash it with our free tool, or we do it with you if you get stuck, and Flashing your firmware walks you through it.
  • A kill switch on the bracket.
    Turns your card off so you don't have to open the case and pull it out. Never switch it while your PC is on.
  • Lights that tell you what's going on.
    Power, PCIe status and data lights. What each one means.

Good to know

  • Genuine GODLIKE.
    Supplied to us directly, no clones.

  • Tested before it ships.
    Free tracked shipping and three months of warranty.

  • The card alone isn't enough.
    You also need a second computer, firmware, and a free slot in the PC you play on.

  • Software isn't included.
    Buy your software separately and run it on your second computer. We don't sell it, but Which DMA software to get lists our suggestions.

  • Flashing needs no paid software.
    MewTools is our own tool. Only run it on your second computer.

  • Full setup.
    Follow Main PC Setup to install your card, then Flashing your firmware to flash it.

Paying

  • Crypto at checkout. If you've never paid with crypto, follow How to pay with crypto. You can pay any amount by card through Stripe in a Discord ticket, with a 10% fee.
  • Crypto payments are final. Unlike a card, a crypto payment can't be charged back, and crypto sent to the wrong address or network is gone for good. There are no returns on hardware, and the warranty covers faults. Check our terms before you pay.
What arrives
  • The GODLIKE 100T DMA Card

  • The USB cable to your second computer

Our boxes come with everything you need. After you order, open a ticket in our Discord for support.

Before you buy
Not sure it's right for you?

Check whether your PC can take the card in Your Main PC, and read Why the 100T for why we sell this card. If you have questions, ask on the forum so the answer helps other people too, or ask in our Discord.

Specifications

The basics
FPGA
Xilinx Artix-7 XC7A100T
Host interface
PCIe x1
Link to second computer
USB-C to USB-A
Condition
New, genuine GODLIKE hardware
The chip
Logic cells
101,440
The board
Slot needed
PCIe x1; also fits x4, x8 and x16 slots
Switch
Kill switch on the bracket. It turns the card's power on and off
The board, continued
Cooling
Heatsink on the board
Speed over USB-C
USB 3.0 through an FT601 chip, around 200 MB/s at most. How much of that you get depends on the firmware
Power source
The PCIe slot. There is no power cable to plug in
Bracket
Comes assembled on card
Firmware
Ships with
Factory firmware
Firmware for your setup
Not included. Buy it with the card or after
Flashing tool
MewTools, our free tool, on your second computer only

Questions

Reviews

5.0
from 31 reviews
Write a review
riofcnNov 8, 2026

@Akiloxe merci pour l aide du fimeware t un bon de malade il m as tout regler c est un crack et @phantom best inglish thanks for the delevery macku and dma card 100t no scam just the best thanks my g

Helpful· 1
zvsccyaNov 4, 2026

+rep 100T DMA with T2 FW and MAKCU Fuser Really good support and great product quality. Everything was well packaged

Helpful
clabeyNov 3, 2026

+rep @phantom helped me pick out the correct devices needed for the games I wanted to play and educated me a lot on how stuff works, my devices came in a few days faster than expected will post another review once I’m setup!

Helpful