If your monitor stays black or says "No signal" through your fuser, set both PCs to 1920 × 1080 at 60Hz, cold boot them and press 1K60 on the remote. That brings the picture back in most setups, and then you raise the mode one step at a time.
Find what you see below. The wiring and the modes for each model are in Video fuser setup.
| What you see | Go to |
|---|---|
| Black or "No signal" from the start | No picture at all |
| The desktop shows, then it goes black when a game loads | Black screen when a game starts |
| You see the game but no overlay | The game shows but the overlay doesn't |
| You see your second PC's desktop over the game | Your second PC's desktop covers the game |
| The POWER light is off | The fuser won't turn on |
No picture at all
Go through these in order.
When a mode won't come up, it's one of these.
- The cable isn't rated for the mode.
18 Gbps HDMI covers every mode on the 10th Gen HDMI model. For 1440p at 165Hz on the DP model, use 48 Gbps Ultra High Speed HDMI on the inputs. On the 4K Pro, use VESA-certified DP8K cables for the top modes. - An adapter is in the way.
Above 1080p at 144Hz, a 10th Gen model needs an active adapter on that input. - Your second PC can't send the mode.
Plug it directly into your monitor and look at Choose a refresh rate under Advanced display. If your rate isn't in the list, it can't send it through a fuser. The 4K Pro needs at least an AMD RX 470, an NVIDIA RTX 2060 or Radeon 780M graphics in your second PC, so the Mew Mini PC can't drive it.
Black screen when a game starts
A game in fullscreen can switch your main PC to another resolution or refresh rate, and then your two PCs don't match or your main PC sends a mode your fuser doesn't do.
- Set the game to the same resolution and refresh rate as your desktop.
- Or use the game's borderless or windowed fullscreen option, which keeps your desktop's mode.
- If the picture still drops, turn G-Sync or FreeSync off in the NVIDIA or AMD control panel to test.
The game shows but the overlay doesn't
- Fusion is off.
Press FUSION on the remote, or on the front of the DP model and the 4K Pro. - The inputs are swapped.
With your main PC in the second input, the game sits on top and hides the overlay. Swap the two cables. - Your second PC sends nothing.
Switch channels to it. If it's blank, check its cable, its input and its mode. If its desktop shows with no overlay, your software isn't drawing yet. - Your second PC has two screens.
Press Windows + P on it and pick Duplicate, so your fuser gets the screen your software draws on. - You're in the lobby.
Most software only draws ESP in a match. - It shows at 60Hz and disappears at a higher rate.
One of your PCs isn't sending the higher mode. Check your second PC's rate list directly on your monitor, or set the mode yourself in EDID mode.
Your second PC's desktop covers the game
Your fuser treats black as see-through, so anything on your second PC that isn't black sits on top of your game.
- Set the background to plain black in Settings, Personalization, Background, Solid color.
- Hide the taskbar. Right-click it, pick Taskbar settings, open Taskbar behaviors and tick Automatically hide the taskbar.
- Hide the icons. Right-click the desktop, pick View and untick Show desktop icons.
- Minimize every other window on it.
The fuser won't turn on
Check the switch on the back is on and you're using the 12V adapter from your fuser's box. If the POWER light on the front stays off, open a ticket in our Discord.
Still black
Open a ticket in our Discord with your fuser model, your monitor, both graphics cards and the mode you're trying. If your fuser is faulty, the three months of warranty cover it.
Common questions
- Why is my screen black with a video fuser?
Most of the time one PC sends a mode your fuser, your cable or your monitor doesn't take. Set both PCs to 1920 × 1080 at 60Hz, cold boot them and press 1K60 on the remote. - Why does my fuser go black when I start a game?
The game switched your main PC to another resolution or refresh rate. Set the game to your desktop's mode or use borderless fullscreen. - Does the Mew Mini PC work with the 4K Pro fuser?
No. The 4K Pro needs at least an AMD RX 470, an NVIDIA RTX 2060 or Radeon 780M graphics in your second PC. - Do both PCs need the same resolution for a fuser?
Yes. The refresh rate can differ, and it's smoothest when both match.
You don't need an account, this tells us what to write more of.
