Skip to content
Back to Learn

FTDI SuperSpeed-FIFO Bridge: fix the driver warning

FTDI SuperSpeed-FIFO Bridge under Other devices means your DMA card's data driver isn't installed. You can install it from MewTools with one click.
GuideUpdated · phantom · 463 reads

In Device Manager on your second PC, FTDI SuperSpeed-FIFO Bridge under Other devices with a yellow triangle means the data driver isn't installed. Your card's data port is plugged in, but your software can't use your card until the driver is installed.

Device Manager on the second computer: with the driver in, FTDI FT601 USB 3.0 Bridge Device shows under Universal Serial Bus controllers. Without it, FTDI SuperSpeed-FIFO Bridge shows with a warning under Other devices

How to fix it

Use the button in MewTools instead of a driver from a download site. If MewTools won't open, go to MewTools blocked by Windows.

It can still be running at USB 2 speed

Device Manager shows the same name even when the link runs at USB 2 speed, so check your speed with the MewTools speed test. Every state is in What Device Manager shows, and other errors are in DMA error messages.

Common questions

  • Is FTDI SuperSpeed-FIFO Bridge my DMA card?
    Yes. It's your card's data port before its driver is installed.
  • Where do I get the FTDI driver for a DMA card?
    Press Install next to Card data cable on the Drivers screen in MewTools. Don't use a driver download site.
  • Does FTDI FT601 USB 3.0 Bridge Device mean my card is on USB 3?
    No. Device Manager shows the same name at USB 2 speed, so check with the MewTools speed test.
Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.