Skip to content
Back to Learn

What is MiTM DMA firmware, and when should you choose it?

MiTM DMA firmware gives you your own device instead of a shared one. See how it works, when to pick it over our other firmware and what the keys cost.
PostUpdated · phantom · 1,005 reads

MiTM (man in the middle) is DMA firmware that runs on your second computer and gives you your own device. Our other firmware makes your card pretend to be a device that other customers share. Choose MiTM if you want one firmware for both EAC and Vanguard and you don't mind renewing a key.

What MiTM is

Here's how I put it in our Discord:

Man in The Middle is a hardware passthrough architecture developed through an ongoing partnership between the development teams. The secondary unit uses software to present a genuine PCIe device to the host through a LeechCore channel. Traditional firmware relies on burning and emulating firmware. MiTM instead uses a unique relationship between each customer's secondary unit and the firmware inside the MiTM software, and it has been developed, tested and maintained over several months.

Our other firmware gives your card a copy of a device's identity, and your card answers your main PC from that copy by itself. On MiTM we set it up to use a real PCIe device that's already in your second computer (the secondary unit). Whenever your main PC asks your card something, your card passes the question to your second computer. Your device answers and the answer comes back through your card, so your main PC is talking to a real device that's only yours.

  • LeechCore.
    MiTM talks through LeechCore, the standard DMA library, so software that speaks LeechCore works with it.
  • Boot loader.
    MiTM runs as a boot loader on your second computer, so it starts when that computer boots.

How it's different from our other firmware

We call our other firmware emulation because your card answers from a 1:1 copy of a real device's identity. On MiTM every answer your main PC gets comes from real hardware.

  • Why that can be better.
    A copy can only be caught where it doesn't match the real thing. Anti-cheats look for those gaps, like a device that answers a bit differently or slower than the real one, or the same device showing up for lots of players. A real device has nothing that could be copied wrong, and on MiTM it's only yours.
  • Why it can be worse.
    More has to work, because your second computer has to be on and running MiTM and every question makes an extra trip over the cable.
  • It can still be detected.
    A real device closes the gaps a copy has, but every firmware can be detected eventually, MiTM included.

When to choose MiTM

  • You want your own device.
    On Premium you share a device with up to 50 people on T1, 25 on T2 or 5 on T3. On MiTM your configuration is set up for you alone.
  • You play EAC and Vanguard games.
    One firmware covers both, and for Vanguard your main PC needs an Intel CPU from 11th gen on.
  • You don't want a ban to mean buying again.
    On MiTM it doesn't, as long as you renew your key.

When another firmware fits better

MiTM costs more over time than firmware you buy once, because you keep renewing a key, and it needs a second computer you plan to keep.

If you'd rather pay once, Private covers Vanguard on an Intel main PC. It's yours with two months of warranty, but it doesn't cover EAC and you share its device with other customers.

Neither MiTM nor our other firmware is better, so which one you pick comes down to your budget. VALORANT DMA compares the Vanguard firmware, and Choosing your firmware compares everything we sell.

What it is made for

  • EAC and Vanguard.
    You make your own config for each game, and VALORANT runs with IOMMU forced on.
  • Lighter anti-cheats.
    Call of Duty's Ricochet, BattlEye, VAC, ACE and EA. It also runs Overwatch, Marvel Rivals, PUBG, FiveM, Roblox, and games on Denuvo Anti-Cheat, GameGuard and XIGNCODE3.

MiTM runs on an AMD main PC for everything except Vanguard. No firmware supports FACEIT.

What a slot means on MiTM

  • On Premium, a slot is a spot on a shared device.
    T3's five slots are five people on one device, and fewer is better for the reasons in What shared firmware means.
  • On MiTM, slots are how many people we take in.
    Every MiTM user has their own device, locked to the second computer it's assigned to. There are 20 to start and we may add more depending on demand. The shop page shows how many are open right now.

We have a direct partnership with MiTM's developer and handle setup and delivery for every slot.

What you pay

  • A one-time $50 entrance fee.
    Paid once per account and added to your first key. It isn't a deposit, so you don't get it back.
  • Then a key.
    One month is $130, three months $280 and six months $460.

We can't move a key to another person or account. If MiTM won't run on your board, we work on it with you and fix it or replace it first. You only get a refund if we still can't get it working after a lot of work and you've followed our instructions and helped us the whole way. The rest is in our terms.

What it needs

  • A compatible 75T or 100T card.
    Our GODLIKE 100T fits, and MiTM isn't tied to your card's DNA ID.
  • A main PC with a free PCIe slot.
    It needs a board from 2020 or newer, and Your Main PC says which slot. Like our other firmware, MiTM also runs with your card in a laptop's M.2 socket, but we don't recommend it and can't help you get it working.
  • A second computer you plan to keep.
    Your slot is locked to its hardware ID. A laptop works as well as a desktop.
  • An account on this site.
    Your slot is tied to it.

Setting it up

You don't send a DNA ID or msinfo32 report, because MiTM is tied to your second computer.

You practise the setup yourself before we finish, so you can redo it on your own.

When your key runs out

MiTM stops working when your key runs out, and the activator app shows how long is left. Your slot stays yours for a week after that so you can get the money together. Tell us in your ticket and buy your next key there.

If you get banned or detected

You make a new config and carry on, with no need to buy MiTM again as long as you renew your key. If we confirm your MiTM device is blocked or detected, or it can't be made to work with your board, you get a replacement.

Changing your card or your second computer

  • A new card.
    You redo the setup.
  • A new second computer.
    Ask in your ticket and we move your slot to it.

Common questions

  • What does MiTM stand for?
    Man in the middle. Your card passes your main PC's questions to a real PCIe device in your second computer, and that device answers.
  • Does MiTM work on AMD?
    Yes, for everything except Vanguard, which needs an Intel CPU from 11th gen on in your main PC.
  • Does MiTM work with a laptop?
    Yes. Your second computer can be a laptop, like with our other firmware. Your card can also run in a laptop main PC's M.2 socket, but we don't recommend it and can't help you get it working.
  • Do I get the entrance fee back?
    No, it's paid once per account and it isn't a deposit.
  • What happens when my key runs out?
    MiTM stops working, and your slot stays yours for a week so you can buy your next key in your ticket.
  • Do I have to buy MiTM again after a ban?
    No, you make a new config and carry on as long as you renew your key.
  • Which card does MiTM need?
    A compatible 75T or 100T card, like our GODLIKE 100T. MiTM isn't tied to your card's DNA ID, so with a new card you redo the setup.

Ask on the support forum before you buy.

Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.