Skip to content
Back to Learn

Failed to retrieve Physical Memory Map! What it means and the fix

Your DMA software couldn't read where your main PC's RAM sits, usually because the USB link is unstable. Check that link first, then see whether a memory map helps.
GuideUpdated · phantom · 345 reads

"Failed to retrieve Physical Memory Map!" means your DMA software couldn't read the list of where your main PC's RAM sits. Usually the USB link between your card and your second PC is unstable and dropped while it was reading.

How to fix it

  • Cold boot, then run the activator.
    A stuck card gives this error too. The steps are in Cold boot.
  • Run the MewTools speed test.
    If it fails, it's the link, and a memory map won't fix a bad cable. Use the cable from the box, a different rear USB 3 port and flip the USB-C plug, then go through Low DMA speed if it's still failing.
  • If the speed test passes, try a memory map.
    Some software, Blurred included, can read the list from a memory map file instead. DMA memory map shows how to make one for Blurred and when to make a new one.

If it still fails, ask your software's support first. Other errors are in DMA error messages.

Common questions

  • Does a memory map fix Failed to retrieve Physical Memory Map?
    Only if the MewTools speed test passes. If the test fails, the problem is the link, and a memory map won't fix a bad cable.
  • What causes it?
    Usually the USB link between your card and your second PC dropped while your software was reading. A stuck card gives this error too.
Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.