Skip to content

Setup

Do these in order, from your msinfo32 report and Fast Boot to putting your card in, getting your second computer ready and flashing your firmware. While you get your DNA ID or flash, keep your main PC in the BIOS so your card has power.

Setting up your card, in order

DMA setup step by step: what plugs in where, in order

Set up your DMA card, second PC, MAKCU or FERRUM and video fuser in the right order. Every cable, which port it goes in and the guide for each step.

developer · Nov 15, 2026

How to find your DMA card's DNA ID and msinfo32 report

How to get your DMA card's DNA ID with MewTools and save an msinfo32 report, then send both on your order page so we can build your firmware.

phantom · Sep 14, 2026

DMA card BIOS settings: how to turn off Fast Boot

Turning Fast Boot off is the only BIOS change our DMA firmware needs. Find the BIOS key and Fast Boot menu for ASUS, MSI, Gigabyte, ASRock, Dell, HP and Lenovo.

phantom · Sep 21, 2026

Do you turn off Kernel DMA Protection or IOMMU for DMA?

Our firmware only needs Fast Boot off. Leave Kernel DMA Protection, IOMMU, Secure Boot and TPM on. Use this guide to check each in Windows and find out which games need them.

phantom · Sep 30, 2026

How to install a DMA card: slot, cable and first boot

Save your BitLocker key, put your DMA card in or use a riser, plug in the JTAG cable, turn off Fast Boot and check your card shows up before you flash.

phantom · Sep 9, 2026

DMA second PC setup: FTDI driver and speed test

Plug your DMA card into your second computer, install the FTDI data driver with MewTools and run a speed test before any software goes on.

phantom · Sep 16, 2026

How to flash DMA firmware with MewTools

How to flash your DMA card's firmware with MewTools, our free app. It checks the file matches your chip and ends with a speed test.

phantom · Sep 16, 2026

Fusers, recording and streaming

How to set up a GODLIKE video fuser for DMA

Set up a GODLIKE video fuser for DMA, then fix no picture, a black screen in game, a wrong refresh rate or an overlay that won't show.

phantom · Sep 16, 2026

How to record or stream with your DMA overlay showing

How to wire a capture card after your video fuser, so you can record or stream the game with your overlay on it, and what to check before you buy one.

phantom · Oct 7, 2026

Record or stream your DMA overlay without a capture card

Send your game over the network to OBS on your second PC, add your overlay, remove its black background and record or stream.

phantom · Oct 14, 2026

New PC, reinstalls and RDMA

Mew Mini PC setup: ports, first start and what to install

Set up the Mew Mini PC as your DMA second PC. Which port your card's cable goes in, what to install with MewTools, and which fusers it drives.

developer · Nov 15, 2026

New PC or Windows reinstall: reflash your DMA card?

No, your firmware stays on your card. What you redo when you change your main PC or second computer, reinstall Windows, or run more than one card.

phantom · Sep 21, 2026

Clean install Windows after booting with an unflashed DMA card

What to do with your DMA card, what to back up and how to clean install Windows from a USB stick after booting with an unflashed card.

phantom · Sep 21, 2026

RDMA network setup: adapters and Ethernet connections

Check your main PC for RTL8125, connect your two PCs through your router or with a direct cable, and get ready for your RDMA setup ticket.

phantom · Oct 14, 2026

Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.