Skip to content
Back to Learn

How long does DMA firmware take after you order?

Your firmware is usually ready about 2 hours after you send your DNA ID and msinfo32 report, 24 hours at most. What each wait is for, and what to do if it takes longer.
GuidePublished · developer · 16 reads

It usually takes us about 2 to 24 hours at most to build your firmware, and we will email you when it's done. The time starts when we have your card's DNA ID and your msinfo32 report, so an order that still says Waiting for you isn't being built yet.

What we need before we start

Send your card's DNA ID, chip size and model on your order page so we can start building your firmware, along with your msinfo32 report.

  • Your msinfo32 report comes from your main PC, before your card goes in. Your msinfo32 report
  • Your DNA ID comes from your card, with MewTools on your second PC. Your DNA ID

Your firmware is locked to your card's DNA ID, so we can't build it before your card is in your hands.

If you ordered a card and firmware together

StepHow long
Your card ships1 to 2 days, never Sundays
Your card arrivesUsually 7 to 10 working days
You send your DNA ID and msinfo32 reportWhenever you're ready
We build your firmwareAbout 2 to 24 hours at most

Do your msinfo32 report while your card is in the post, so only the DNA ID is left when it arrives.

What your order page says

  • Waiting for payment.
    Your crypto hasn't confirmed yet, which takes seconds for some coins and up to an hour for Bitcoin.
  • Waiting for you, in red.
    You paid, and we still need a DNA ID or an msinfo32 report from you.
  • Being built.
    We have both and we're building your firmware.

Every status is in Order status explained.

MiTM and RDMA

MiTM and RDMA are set up with you in a Discord ticket, so open one with your order number after you pay. How tickets work

If it's been more than 24 hours

  1. Open your order page and check it says Being built. If it says Waiting for you, send what's missing.
  2. Check your email, spam folder included, for our message that your firmware is ready.
  3. Open a ticket in our Discord with your order number.

Common questions

  • How long does it take to build my firmware?
    It usually takes us about 2 to 24 hours at most after we have your DNA ID and your msinfo32 report.
  • Can you build my firmware before my card arrives?
    No. Your firmware is locked to your card's DNA ID, and you get that from your card.
  • How do I know my firmware is ready?
    We email you, and the file is on your order page.
  • Do I set my firmware up myself?
    Yes, you flash it with MewTools, our free app. Flashing your firmware
Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.