Skip to content
Back to Learn

DMA firmware troubleshooting: crashes, freezes and blue screens

Fix crashes, freezes and blue screens with DMA firmware. Check your BIOS settings, Link State Power Management, shared lanes, your cable and your anti-cheats in order.
GuidePublished · developer · 49 reads

If your PC or your games crash, freeze or blue screen with our firmware on your card, go through these checks in order. Every setup is different, so you can have a problem nobody else on your firmware has, and the cause is often a BIOS setting, Link State Power Management, a slot that shares lanes or your cable.

Be ready to put the effort in and do your own testing. We'll always find a fix, and we won't ever leave you stranded.

If your card isn't showing at all, start with DMA card not working. If your main PC won't start, go to PC won't boot after a DMA card.

Cold boot both PCs first

Shut both PCs down, unplug their power cables and hold each power button for 15 seconds, then start your main PC, then your second PC, and run the activator. Cold boot both PCs

Test one change at a time

Change one thing, cold boot and play the game that crashed, then write down what you changed and what happened. If you change three things at once, nobody can tell which one fixed it.

BIOS settings

Save your BitLocker key before you change any of these, because Windows can ask for it after a BIOS change.

  • Fast Boot.
    Turn it off, since every firmware needs it. Where it sits on your board is in BIOS settings.
  • Your card's slot speed.
    Set it to Gen 1.
  • CSM and Resizable BAR.
    Your card works with either one on or off. If you still crash, switch CSM to its other setting and test, then do the same with Resizable BAR.

A BIOS update puts every setting back to default, so check them again after one.

Windows saves power by putting the link to a PCIe card to sleep, and that can drop your card in the middle of a game. Turn it off on your main PC.

  1. Open Control Panel, then Power Options.
  2. Next to your plan, click Change plan settings, then Change advanced power settings.
  3. Open PCI Express, then Link State Power Management, and set it to Off.
  4. Click OK and cold boot.

If your BIOS has an ASPM setting, turn that off too, since it's the same power saving.

Conflicting lanes

On a lot of boards a slot shares its lanes with an M.2 socket, another slot or the Wi-Fi and Bluetooth chip, and when both are in use one of them can drop out or run badly.

  • Move your card to another slot.
    Your motherboard manual has a table of which slots share. Which slot to pick
  • Turn off onboard Wi-Fi and Bluetooth in your BIOS, then test. Why that helps

Try another cable

Your cable can cause crashes too. We had a customer who crashed on a USB 3.2 cable and ran fine on a 3.0 or 2.0 cable, while other people run 3.2 cables with no trouble.

Test with a different cable, then a different rear USB port on your second PC. A USB 2.0 cable is only for the test, because your speed drops on it (Low DMA speed fix).

Playing games on more than one anti-cheat

Anti-cheats can get in each other's way, so if you play VALORANT and other games, the other games can crash after VALORANT has been open.

  • On a day you play other games, don't open VALORANT.
  • Restart your PC before you play VALORANT.

The same goes for any two anti-cheats. If a game only crashes after another game has run, restart between them and tell us which two games.

Windows and your motherboard

A custom or debloated Windows, an old BIOS and some motherboards cause freezing and stuttering too. Those checks are in PC freezing or stuttering with a DMA card.

Blocked in game, fine in the lobby

If your firmware works in the lobby and shows as blocked once you load into a match, for example in Fortnite, it isn't blocked. Your card's device is stuck in a bad state and keeps losing its connection, and loading a match leaves it without the resources it needs.

  1. Open Device Manager on your main PC and look for a yellow mark on your firmware's device. Where your card shows
  2. With or without a yellow mark, right-click your firmware's device and click Uninstall device, leaving the box in the pop-up unticked. Shut your PC down with its power button, then start it again.
  3. If it still happens, go through the BIOS settings, Link State Power Management and cable checks on this page, since anything that keeps your card's power steady helps.

That fixes it for most people. If you still get errors, reinstall Windows or update your BIOS, then uninstall recent Windows updates and pause new ones.

Sound cuts out after new firmware

If your sound cuts out when you use your card after flashing new firmware, change ports on your main PC:

  1. Move your card to another PCIe slot.
  2. Move your USB devices to other ports, your USB headset or USB sound card included.

IOMMU pop-up on Intel with Private firmware

If you're on Intel with Private firmware and you get an IOMMU pop-up, there's no need to worry, because you bypass it. Restart your PC and play again, and for most people that's the fix.

If your card stops working after the pop-up, which happens to a few people, your VMD setting is gone, since a Windows reinstall or a BIOS update clears it. Map the VMD controller to your card again:

  1. If you don't know which root port is your card, shut your PC down and turn your card off with its kill switch. Start your PC, go into your BIOS and take a photo of the root ports.
  2. Shut down, turn your card back on and go into your BIOS again. The root port that's there now and missing from your photo is your card.
  3. Map the VMD controller to that root port, then save and exit.

If your drive is missing after that and Device Manager shows no VMD driver, install the VMD driver from your motherboard's support page. That's it, enjoy cheesing.

Banned, but your device isn't detected

If a game banned you, the status page shows no detection on your device and your firmware shows up as a network adapter, like a network chip or an Ethernet card, you don't need a replacement.

  1. Spoof as you normally would.
  2. Install TMAC and change the MAC address of your firmware's network adapter. TMAC changes only the adapter you pick.
  3. Keep playing on the same firmware.

Leave your real network adapter's MAC address alone, because changing that one can be detected.

If nothing here fixes it

In the worst case the device your firmware runs on conflicts with your configuration, meaning your motherboard, your CPU and your BIOS together, and we work that out with you.

Open a ticket in our Discord and send us:

  • Your motherboard model and BIOS version
  • Your CPU and your Windows version
  • Which games crash, and when in the game
  • Everything you changed from this page, and what each change did
  • A MewTools report

Common questions

  • Why does my PC crash with DMA firmware when other people's doesn't?
    Every setup is different, because your motherboard, your BIOS settings, your Windows power settings, your slot and your cable all play a part.
  • Which BIOS settings fix DMA firmware crashes?
    Turn off Fast Boot and set your card's slot to Gen 1. Your card works with CSM and Resizable BAR on or off, so try each on its other setting, one at a time.
  • What is Link State Power Management?
    A Windows power setting that puts the link to a PCIe card to sleep. Turn it off under Power Options, Change advanced power settings, PCI Express.
  • Can a USB cable crash my PC with a DMA card?
    Yes. One customer crashed on a USB 3.2 cable and ran fine on a USB 3.0 cable, so test another cable.
  • Why do my other games crash after VALORANT?
    Anti-cheats can get in each other's way. Don't open VALORANT on a day you play other games, and restart your PC before you play it.
  • Why does my firmware show as blocked in game but work in the lobby?
    It isn't blocked. Your card's device is stuck in a bad state, so uninstall it in Device Manager with the box unticked, shut down with the power button and start again.
  • Why does my sound cut out with a DMA card?
    Move your card to another PCIe slot and your USB devices to other ports, your USB headset included.
  • What do I do about an IOMMU pop-up on Intel?
    Restart your PC and play again. If your card stops working, map the VMD controller to your card's root port again in your BIOS.
  • I got banned but my device isn't detected. Do I need a replacement?
    No. Spoof as normal and change the MAC address of your firmware's network adapter with TMAC, leaving your real one alone.
Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.