To start with DMA you need a main PC to play on, a second computer, a DMA card, firmware for your card and software for your second computer. An aim device and a video fuser are optional.
We post blogs for anything that comes to mind and you can learn a lot. If you are new, start with this one, then come back to the links as you put your setup together.
What DMA is
DMA stands for direct memory access. A DMA card is a small card that goes inside the PC you play on, which we call your main PC. It reads what the game has in memory and sends it over a USB cable to your second computer, where your software shows you what your card reads.
If you want to know how it works, read What is a DMA card?
How it differs from a software cheat
A software cheat runs on the PC you play on, next to the game and the anti-cheat. Most big anti-cheats run a kernel driver, a part of the anti-cheat that sits deep inside Windows and watches the processes, drivers and game memory on that PC.
With DMA, no cheat runs on your main PC. Your card reads the game's memory over PCIe and the software runs on your second computer, so the anti-cheat has no program to find. It looks at your hardware instead, reading what every device in your PC reports about itself and checking whether it acts like the real thing. Your firmware is there for those checks.
DMA doesn't make you unbannable. Your account can still be banned, and a hardware ban uses your main PC's own IDs, like its drives and motherboard, which a card doesn't change. If your main PC already has a hardware ban from a software cheat, adding a card doesn't lift it. Games like VALORANT can also make you turn on IOMMU, a setting that controls which memory each device can reach.
DMA vs software cheats has the rest, and how people still get caught is in Is DMA detectable?
What you need
Your main PC
The computer you play on. Your card goes in a free PCIe slot, the same kind of slot your graphics card uses, and it only uses one lane, so the short x1 slot is plenty. Your motherboard should be from about 2020 or newer, and on AMD, B550 boards are mixed. Your card takes its power from the slot, so there's no cable to your power supply. Your processor doesn't matter except for Vanguard (VALORANT), which needs Intel. We don't recommend a laptop as your main PC, and we can't help you with one. Your Main PC
Your second computer
Any Windows 10 or 11 PC or laptop that isn't the one you play on, with at least 4 cores, 8GB of memory and a USB 3 port on the back. You use this computer to run your software, flash your card with MewTools and send commands to your aim device. Nothing goes inside it, because your card connects to it by cable. Graphics only matter if you get a fuser. We don't sell one, and a used office mini PC like a Dell OptiPlex 7070 Micro is about $150 to $180. The second PC says what to buy.
Your DMA card
Ours is the GODLIKE 100T, $125. The main chip on it is an FPGA, a chip that does whatever the firmware written onto it tells it to, and 100T is the size of that chip. Every firmware we make needs a 75T or a 100T. Your card reads your main PC's memory over PCIe without asking your processor, and sends it to your second computer at up to about 200 MB/s. It doesn't lower your FPS in any way you'd notice, because it doesn't draw frames (Does a DMA card lower your FPS?). Why the 100T says why it's the only card we sell.
Firmware
Every PCIe device tells your PC what it is when your PC starts, like a network card or a sound card, with its own IDs and serial number. Your card ships with firmware that only proves it works. Our firmware makes your card show up and behave like a real device instead of a DMA card. Anti-cheats compare what each device reports and how it behaves with the real hardware, so the closer the copy, the better your odds. Higher tiers get more work on each device and fewer people on it.
Which firmware you need depends on your game's anti-cheat and your CPU. Advanced, $200, is made for EAC, BattlEye, VAC, Ricochet, ACE and EA. Premium T1, T2 and T3 cover the same anti-cheats with fewer people on a device. For Vanguard, Private is $250, and RDMA runs it on AMD with no DMA card. Your firmware is locked to your card's DNA ID, so a new card means new firmware, except on MiTM. Choosing your firmware compares them, and T1 vs T2 vs T3 says whether you need a higher tier.
Software
The program on your second computer that you use while you play. It knows where the game keeps each thing in memory, reads it through your card and draws it for you as ESP, which shows players through walls, or as a radar. With an aim device it can aim too. It's a subscription you buy from its maker, because we don't sell software. We suggest Blurred, from around $19.99 a week, or Streck for Fortnite. A Blurred license is locked to your second computer and covers one game. Your software has to support your card, your firmware and your aim device, so check before you buy it. What it does and which one to get
An aim device, if you want aim
Your mouse plugs into it, and it plugs into both computers, one cable to each. Your main PC sees one normal mouse, and your software sends it moves that get added on top of your own. Without one, your software can show you things but can't move anything. We recommend MAKCU, $25, which does the same job as FERRUM, $160. The chips in it are the same kind normal mice use, and what anti-cheats check is how your aim moves (Can anti-cheat tell how you aim?). MAKCU or FERRUM
A video fuser, if you want one screen
Both computers plug into it and one cable goes from it to your monitor. It lays your second computer's picture over your game, and anything black on it is see-through, so only what your software draws shows up. Both computers have to send the same resolution. A fuser only carries the picture, so your second computer still needs a keyboard and mouse. Ours start at $135 with the GODLIKE 10th Gen Fuser (HDMI). Without one, use your monitor's second input, a spare monitor or a KVM switch. Do I need a video fuser?
If you only have one PC, read this first, and if you already own a card, go to Using our firmware on it.
What it costs
With a spare PC that already has a screen, keyboard and mouse, you buy your card and Advanced for $325, plus software from around $19.99 a week. Starting from one PC, a used mini PC, a keyboard and mouse, the HDMI fuser and MAKCU bring it to about $660 before software. For Vanguard, Private costs $250.
The Starter Bundle is the 100T, the HDMI fuser and MAKCU for $275 with express shipping, and you add your firmware to the same order. Your second computer, aim device and fuser are one-time buys and carry over if you change card. Software is the part you keep paying for, and MiTM and RDMA are keys you renew. What a whole setup costs adds up every part.
Words you'll see
- Device.
Every firmware build runs on a device that a group of people share, everyone has their own serials. Device status shows how each one is doing right now. - DNA ID.
Your card's own ID number, built into its chip like a serial number. Most providers, us included, lock your firmware to it, so the file only runs on your card. You get it with MewTools on your second computer and send it to us after you order. - msinfo32 report.
A file Windows makes about your main PC. We use it with your DNA ID to build your firmware. - Flashing.
Writing your firmware onto your card from your second PC with MewTools. - JTAG port and data port.
The two USB-C ports on your card's bracket. JTAG is only for flashing and data is the one you use every day. The 100T comes with one cable, so it goes in JTAG to flash and then moves to data. - MewTools.
Our free app for your second PC. It gets your DNA ID, flashes your firmware and runs the speed test. Getting started with MewTools

How our site helps
- Check before you pay.
Will DMA work for me? checks your PC and game, and Find my firmware asks a few questions and picks a firmware for you. - Buy it together.
The bundle builder puts the card, firmware and extras in one order, and the more you add, the more comes off. Checkout is crypto (Why we use crypto), and if you've never paid with it, How to pay with crypto shows you how. Card through Stripe is done in a Discord ticket, with a 10% fee. - Your order page.
You send your card's DNA ID and msinfo32 report from it, and your firmware, activator key and warranty all show up there. See After you order. - A guide for every step.
Everything on Learn is free, and the checklist below puts it in order. - People to ask.
Questions before you buy go on our forum, where the answer helps the next person too. After you order, open a ticket in our Discord. Reviews shows what our customers say.
How long it takes
- The card.
It ships in 1 to 2 days, not counting Sundays, and usually arrives in 7 to 10 working days. Do your msinfo32 report while you wait. - Your firmware.
Once you send your DNA ID and msinfo32 report, it's usually on your order page in about 2 hours, 24 hours at most, and we email you when it's there.
Putting it together
Do it in this order. DMA setup step by step shows every cable.
Warning. While you get your DNA ID or flash, keep your main PC in the BIOS so your card has power. Never boot into Windows on your main PC with a card that isn't flashed with our firmware yet. If you already did, reinstall Windows on your main PC before launching any games.
Mistakes beginners make
- Guessing your game's anti-cheat.
Your firmware is made for a set list of anti-cheats, so look your game up in Which anti-cheat does my game use? before you pay. - Buying a card second hand.
Clone cards are out there, and some listings sell a smaller chip than they say. MewTools reads the real chip size through the JTAG port, so check a card from somewhere else before you buy firmware for it. Fake fusers and clone DMA cards - Using a slot that shares lanes with your M.2 drive.
A shared lane can switch your card off or drop your drive to fewer lanes, and your motherboard manual's slot table shows which slots share. Which slot to pick - Using a USB-C charging cable.
A lot of USB-C cables have USB 2 wiring inside, and your card shows up on one but runs too slow to use. Use the cable that came with your card. Low DMA speed fix - Turning off Secure Boot, TPM or IOMMU.
Guides online tell you to, but the only BIOS change our firmware needs is turning off Fast Boot, and the others can stop your games from starting. Do you turn off Kernel DMA Protection or IOMMU? - Skipping your BitLocker key.
Changing hardware or BIOS settings can make Windows ask for a 48 digit recovery key when it starts, and without the key you can't get into your drive. Save your BitLocker key - Using a virtual machine as your second computer.
It runs on your main PC, which puts your software back on the PC the anti-cheat watches. - Playing blatant.
Stats, reports and replays catch blatant play on any setup, and on a shared device every ban gives anti-cheats more info on the device you all use.
When something goes wrong
- Your card isn't working.
Go through DMA card not working. - Your firmware gets detected.
Any firmware can get detected at any moment, ours included. If yours does, we pull that device and tell everyone on it by email and here on the site. In warranty, you press Get my new firmware on your order page and flash the new file the same way as the first time. How detections work - You're still stuck.
Open a ticket in our Discord with your order number.
Common questions
- Can I use DMA with one PC?
No, your software has to run on a second computer. Can you use a DMA card with only one PC? - Can I get banned using DMA?
Yes, DMA doesn't make you unbannable. Your account can still be banned, and any firmware can get detected at any moment, ours included. - Does a DMA card lower my FPS?
Not in any way you'd notice, because it doesn't draw frames. Does a DMA card lower your FPS? - Do I need an aim device or a fuser?
No, both are optional. Without an aim device your software can show you things but can't move your mouse, and without a fuser you use your monitor's second input, a spare monitor or a KVM switch. - Do you sell the software?
No, you buy it from its maker. We suggest Blurred, or Streck for Fortnite. Which software to get - How long does it take to get set up?
Your card usually arrives in 7 to 10 working days. Your firmware is usually on your order page about 2 hours after you send your DNA ID and msinfo32 report, 24 hours at most. - How do I pay?
Checkout is crypto, and How to pay with crypto shows you how. Card through Stripe is done in a Discord ticket, with a 10% fee.
If you have questions, post on our forum <3.
You don't need an account, this tells us what to write more of.
