The Mew Mini PC arrives with Windows freshly installed. Plug in power, a screen, a keyboard and a mouse, put your card's cable in a rear USB 3 port, then install MewTools and let it set up the drivers.
What's in the box
- The mini PC
- Its 19V power supply
No screen, keyboard or mouse comes with it, and the cable to your card comes in your card's box.
The ports
- Back.
19V power, HDMI, Ethernet, two USB 3 Type-A ports and one USB-C port marked with the Thunderbolt symbol. - Front.
Two more USB 3 ports, a headphone jack and the power button.
Your card's cable goes in a rear USB 3 port, and your aim device's cable in any other USB port.
A way to see it
You need one of these to see and control it.
- A second screen, or the second input on your monitor, with a keyboard and mouse.
- A KVM switch, which shares one screen, keyboard and mouse between both PCs.
- A video fuser, plus a keyboard and mouse on the mini PC, since a fuser only carries the picture.
Its Intel Iris Plus 640 graphics drive up to 1440p at 144Hz over HDMI, which covers the 10th Gen fusers. The 4K Pro needs stronger graphics than that.
First start
- Plug in power, your screen, your keyboard and your mouse, then press the power button on the front.
- Connect it to the internet with the Ethernet port on the back, because MewTools downloads its drivers and the activator checks your key online.
- Check the clock is right. Open Settings, Time & language, turn on Set time automatically and press Sync now.
Install MewTools
- Download MewTools and run the installer. It asks for admin when it opens, so click yes.
- Open Setup Pack and press Install missing, so the runtimes your software needs are in.
- Open Drivers and install the driver for the port your cable is on. That's JTAG before the flash and Card data cable after it.
- Open Windows Update and turn on Stop Windows Update from Changing Drivers.
Every step is in Second PC setup.
Then your card
- Card not flashed yet.
Keep your main PC in the BIOS, get your DNA ID, then flash your firmware. - Card already flashed.
Move the cable to your card's data port, run Mew Activator and run the speed test in Card Check. On a rear USB 3 port you want GOOD at 140 MB/s or more.
If something is wrong
- Your speed is slow.
Use the cable from your card's box in the other rear USB 3 port. Low DMA speed fix - MAKCU's port doesn't connect.
Check which entry under Ports (COM & LPT) is MAKCU's. MAKCU troubleshooting - It arrives and doesn't work.
It comes with three months of warranty, so open a ticket in our Discord.
Common questions
- Does the Mew Mini PC come with Windows?
Yes, freshly installed and tested before it ships. - Which port on the mini PC does my DMA card use?
A rear USB 3 Type-A port. - Does the mini PC need a monitor?
It needs a way to see it, and a second screen, a KVM or a video fuser all work. - Can the Mew Mini PC run a 4K Pro fuser?
No, its graphics are below what the 4K Pro needs. It drives the 10th Gen fusers up to 1440p at 144Hz. - Can I add memory to it?
No. It has 8GB of DDR4 and that can't be upgraded.
Did this help?
You don't need an account, this tells us what to write more of.
