Skip to content
Back to Learn

RDMA troubleshooting: won't connect, stops after 30 seconds, slow or no internet

Fix RDMA that won't connect, stops after about 30 seconds with VMM INIT FAILED, runs slow or leaves your PC with no internet. Cold boot, power saving, ports and link speed.
GuidePublished · developer · 20 reads

If RDMA won't connect, cold boot both PCs first, then check the Ethernet cables and their link lights. If it connects and stops after about 30 seconds, Windows is switching your network adapter off to save power.

The cabling and the adapter check are in Getting your network ready for RDMA.

RDMA won't connect

  1. Cold boot both PCs.
    Shut both down, unplug them, hold each power button for 15 seconds, then start them.
  2. Check the cables.
    Your main PC's RTL8125 port goes to your second PC, or to your router. Push each plug in until it clicks.
  3. Check the link lights.
    The lights next to each Ethernet port are on when the cable has a link. No lights means the cable or the port.
  4. Check your key.
    RDMA stops when your key runs out, until you renew it. Monthly keys

It stops after about 30 seconds with VMM INIT FAILED

Windows switches your 2.5GbE adapter off to save power, so stop it from doing that on your main PC.

  1. Right-click the Start button and open Device Manager.
  2. Open Network adapters, right-click the adapter RDMA uses and pick Properties.
  3. Open the Power Management tab.
  4. Untick Allow the computer to turn off this device to save power, then click OK.

No internet after setting up RDMA

Your cables are in the wrong ports. The RTL8125 port goes to your second PC or your router, and your internet comes from your other Ethernet port or Wi-Fi.

RDMA is slow

  • Each Ethernet port should link at 1 Gbps or more.
    We've seen one port linking at 100 Mbps slow it down. Windows shows the speed under Settings, Network & internet, Ethernet, next to Link speed.
  • Take out any Wi-Fi extender between your two PCs.
  • Put a USB Ethernet adapter in a USB 3 port.
    A 1 Gbps port on your second PC works but limits the link, and a USB 2.5GbE adapter like a UGREEN one is faster.
  • Try a direct cable.
    One cable between your two PCs avoids a slow router port. Direct cable between two PCs

The wrong adapter

Your main PC needs an RTL8125, built into your motherboard or on a PCIe network card, and a USB Ethernet adapter can't do that job. USB adapters only work on your second PC. Check your adapter

Still stuck

We set RDMA up with you, so open a ticket in our Discord with your order number and tell us what you see and what you tried.

Common questions

  • Why does RDMA stop after 30 seconds?
    Windows switches the network adapter off to save power. Untick Allow the computer to turn off this device to save power on the adapter's Power Management tab.
  • Why do I have no internet with RDMA?
    Your cables are in the wrong ports. The RTL8125 port is for RDMA, and your internet comes from your other port or Wi-Fi.
  • Can I use a USB Ethernet adapter for RDMA?
    On your second PC, yes. Your main PC needs an RTL8125 on the motherboard or on a PCIe card.
  • Does my internet speed matter for RDMA?
    No. RDMA runs between your two PCs on your own network.
Are we missing something?

Tell us what you came looking for and couldn't find, or what we got wrong, and we'll look into it. No account needed.

Did this help?

You don't need an account, this tells us what to write more of.