Mew Activator runs on your second PC. Download it from your order page, paste your key and press activate device. Run it again every time your main PC restarts, before you open your software.
Your card can't read memory until you activate it. Your firmware stays on your card and your main PC works like normal without it, but your software shows TINY PCIe TLP Algorithm auto-selected and reads nothing.
Where to get it
Your activator and your key are on your order page. If you ordered in a Discord ticket, the newest activator is in that ticket.
Activate your firmware
- Download the activator from your order page and extract the zip.
- Open the .exe.
- Paste your key and tick remember key.
- Press activate device. A tick means your card is active.
- Open your software.
Your first activation is also in Check the flash worked.
When to run it again
- Every time your main PC restarts, or is shut down and started again.
- After a cold boot. Start your main PC, then your second PC, then activate.
- After you turn your card back on with the kill switch.
- After a reset or a Windows reinstall on your main PC.
MewTools is for drivers, your DNA ID, flashing and the speed test, so there's no need to open it before every session.
Your key
Your activation key is lifetime, so it never runs out and needs no reset. MiTM and RDMA keys run for the months you bought and you renew them (Monthly keys), and MiTM has its own activator that shows how long is left.
It hangs on activate device, or won't activate
The activator was updated in late October 2026 and older copies stopped working, so if yours is from before that or you aren't sure, download it again from your order page.
If yours is the new one, go through these in order.
- Check the cable.
It goes on your card's data port, with the cable from the box, in a rear USB 3 port on your second PC. - Close everything else that uses your card, MewTools and your software included.
- Cold boot both PCs, then activate again.
It can't reach the server, or won't take your key
- Download the activator again from your order page, unless yours is from after late October 2026.
- Fix your second PC's clock.
Open Settings, Time & language, turn on Set time automatically and press Sync now, because a wrong clock stops the activator. - Copy your key again from your order page and paste it in.
- Open a ticket in our Discord with a screenshot of what the activator shows.
Your software still shows an error after the tick
Close your software and open it again, and if it still fails, run the MewTools speed test. If the test passes, your card and firmware are fine and the problem is in your software (DMA software won't start). If it fails, go to DMA card not working.
Common questions
- Where do I install Mew Activator?
On your second PC. Nothing of ours goes on your main PC. - Do I have to run the activator every time?
Yes, every time your main PC restarts. Run it after your main PC is in Windows and before you open your software. - Does my activation key run out?
No, your key is lifetime. MiTM and RDMA keys run for the months you bought. - What happens if I start a game without activating?
Your PC and your game run like normal, and your software shows nothing until you activate. - Do I run the activator on a card that isn't flashed yet?
No. Flash your firmware first, with your main PC in the BIOS.
You don't need an account, this tells us what to write more of.
