Skip to content
1 / 4
Aim DevicesBuilt by FERRUM

FERRUM

FERRUM aim device with mouse or keyboard passthrough up to 8000 Hz and commands from your second PC. KMBox B+ Pro compatible.

$160.00
In stock
1

To pay by card or anything other than crypto, open a ticket in our Discord. Card checkout on the site is coming in the next few months.

Free shipping
Tracked to your door
3-month warranty
Replaced if faulty
Tested
Checked before it ships
Build a bundle
0 of 4 parts
0% off3% off5% off10% off

Four parts chosen together take 10% off all four, and this one can start it.

Edit

What this is

FERRUM sits between your mouse or keyboard and your two computers and passes everything through to your main PC at up to 8000 Hz. It's KMBox B+ Pro compatible.

What it does

  • Passes your mouse or keyboard through.
    Hold FERRUM with the ports pointing towards you. Your mouse or keyboard plugs into the USB-A port in the middle. The USB-C port on your left goes to your main PC, where FERRUM presents itself as an input device.
  • Takes commands from your second computer.
    The USB-C port on the right goes to your second computer, which opens a serial port and sends commands. You choose in the utility whether FERRUM presents as a mouse, a keyboard, or both.
  • Reports up to 8000 times a second.
    MAKCU is full speed, so it stops at 1000 Hz whatever firmware it runs.

Good to know

  • 8000 Hz is the most it can carry.
    Your mouse still reports at its own rate, so a 1000 Hz mouse gives you 1000 Hz, and your main PC and the game have to keep up as well.
  • Software isn't included.
    Buy your software separately and run it on your second computer. We don't sell it, but Which DMA software to get lists our suggestions.
  • A drop-in for a KMBox B+ Pro.
    Your existing software and wiring keep working.
  • Wireless works too.
    It goes through the mouse or keyboard's own USB receiver, and Bluetooth doesn't go through it.
  • We recommend MAKCU for most people.
    FERRUM's only advantage is 8000 Hz, and it's an easy swap if you're replacing a KMBox B+ Pro. For everything else, MAKCU does the same job for $25. MAKCU vs FERRUM explains why we recommend it.
  • Not plug and play on your second computer.
    You install the CP210x serial driver and the Ferrum Utility there before a COM port appears.
  • Tested before it ships.
    Free tracked shipping and three months of warranty.
  • Full setup.
    FERRUM setup goes through the wiring, the driver, the utility and your software. There are also guides for connecting your software, updating, rolling back, testing USB cables, troubleshooting and Linux. You do all of it on your second PC.

Paying

  • Crypto at checkout. If you've never paid with crypto, follow How to pay with crypto. You can pay any amount by card through Stripe in a Discord ticket, with a 10% fee.
  • Crypto payments are final. Unlike a card, a crypto payment can't be charged back, and crypto sent to the wrong address or network is gone for good. There are no returns on hardware, and the warranty covers faults. Check our terms before you pay.
What arrives
  • 1x FERRUM device

  • 2 USB-A to USB-C cables

  • A 3D printed case

Our boxes come with everything you need. After you order, open a ticket in our Discord for support.

Before you buy
Not sure it's right for you?

We recommend MAKCU, and we don't recommend FERRUM. We stock FERRUM because some customers wouldn't buy from us without it. Read Why we recommend MAKCU for the reasons. If you have questions, ask on the forum so the answer helps other people too, or ask in our Discord.

Specifications

What it is
Type
Mouse and keyboard passthrough, input relay
Recommended for
An 8000 Hz mouse, or replacing a KMBox B+ Pro. For everything else, we recommend MAKCU
Command set
KMBox B+ Pro compatible. Not a drop-in for MAKCU, the two speak different command sets
Performance
Polling rate
Up to 8000 Hz
Input support
Mice
Supported
Keyboards
Supported
Wireless
Yes, with its own USB receiver. Not Bluetooth
Device modes
Mouse, keyboard, or both
Ports and setup
Left port
USB-C. To your main PC, on a motherboard port, not the front of the case
Middle port
USB-A. Your mouse or keyboard, wired or wireless with its own USB receiver. One device at a time
Right port
USB-C. To your second computer
USB hubs on the input port
Not supported. It only passes through one device, confirmed by Ferrum
Software and firmware
Serial driver
CP210x, installed on the second computer
Utility
Ferrum Utility, installed on the second computer
Firmware updates
Through the Ferrum Utility, on the second computer. How to update

Questions

Reviews

5.0
from 8 reviews
Write a review
clabeyNov 3, 2026

+rep @phantom helped me pick out the correct devices needed for the games I wanted to play and educated me a lot on how stuff works, my devices came in a few days faster than expected will post another review once I’m setup!

Helpful
AkAOct 29, 2026

+rep 3 day shipping faster then Amazon Prime I slept woke up and shit was at my doorstep delivery driver talking bout some where can I get some. Told him can’t leak

Helpful