+rep @phantom helped me pick out the correct devices needed for the games I wanted to play and educated me a lot on how stuff works, my devices came in a few days faster than expected will post another review once I’m setup!
HelpfulGODLIKE 4K Pro Fuser
A video fuser that puts your two computers on one monitor over DisplayPort, up to 1080p at 360Hz, 1440p at 240Hz or 4K at 120Hz.
To pay by card or anything other than crypto, open a ticket in our Discord. Card checkout on the site is coming in the next few months.
Four parts chosen together take 10% off all four, and this one can start it.
What this is
The GODLIKE 4K Pro Fuser is all DisplayPort and made for high refresh monitors. Your main PC and your second computer go into the two DisplayPort inputs, and one DisplayPort output carries the merged picture to your monitor.
What it does
- Merges the two pictures.
Black on the top layer is treated as see-through, so only what your second computer draws sits over the game underneath. - Higher refresh than the 10th Gen.
1080p at 360Hz, 1440p at 240Hz and 4K at 120Hz, with 2560 × 1080 at 165Hz and 3440 × 1440 at 60Hz in between.
Good to know
- Your second computer needs real graphics.
It has to send out the same high refresh modes. That needs an AMD RX 470 or newer, an NVIDIA RTX 2060 or newer, or integrated Radeon 780M or better. - DisplayPort only.
If your computers or monitor use HDMI, look at the 10th Gen DP or HDMI models. - Tested before it ships.
It comes with free tracked shipping and three months of warranty. - On a 3440 × 1440 ultrawide this box runs 60Hz.
The 10th Gen HDMI model does 100Hz at that resolution for a lot less. - Zero latency, so the fuser adds no delay to your game.
- 4:4:4 color and EDID pass-through aren't stated.
GODLIKE states both for the 10th Gen models, but the 4K Pro's listing doesn't say either way. Video fusers compares the three. - Full setup.
Video fuser setup covers the wiring, the settings on both computers and picking the mode.
Paying
- Crypto at checkout. If you've never sent crypto, How to pay with crypto shows you how. You can also pay by card through Stripe in a Discord ticket, for any amount, with a 10% fee.
- Crypto payments are final. Unlike a card, a crypto payment can't be charged back, and crypto sent to the wrong address or network is gone for good. There are no returns on hardware and the warranty covers faults, so check our terms before you pay.
One GODLIKE 4K Pro Fuser
One remote control
Two DisplayPort cables
One 12V 2A power adapter, US plug
One EU plug adapter
Our boxes come with everything you need. After you order, open a ticket in our Discord for support.
Video fusers, and which one helps you choose a fuser for your setup. If you have questions, ask on the forum so the answer helps other people too, or ask in our Discord.
Specifications
- Inputs
- 2 DisplayPort, PC1 for your main PC and PC2 for your second computer
- Outputs
- 1 DisplayPort, to your monitor
- 1920 x 1080
- 144, 165, 240 and 360Hz
- 2560 x 1080
- 165Hz
- 2560 x 1440
- 144 and 240Hz
- 3440 x 1440
- 60Hz
- 3840 x 2160
- 60 and 120Hz
- Processing
- Zero latency
- Remote
- Included
- Buttons
- On the front panel
- AMD
- Radeon RX 470 or newer
- NVIDIA
- GeForce RTX 2060 or newer
- Integrated
- Radeon 780M or better
Questions
- The 10th Gen HDMI has a single HDMI output, is run from the remote, and runs 1440p at 144Hz.
- The 10th Gen DP adds a DisplayPort output alongside HDMI, buttons on the unit, and 1440p at 165Hz. Its current price is $165.
- The 4K Pro is only worth it if you'll use the extra refresh rate (1080p above 240Hz, 1440p at 240Hz or 4K at 120Hz). If your monitor tops out at 1080p 240Hz, 1440p 165Hz or 4K 60Hz, the 10th Gen DP does the job for less than half the price.
Video fusers, and which one compares them.
Because it has to put out the same high refresh mode your monitor runs, and weaker graphics can't do 1440p at 240Hz.
Your motherboard doesn't matter here because a fuser only sees two video outputs and a monitor. When it goes wrong it's almost always a mode your monitor or graphics card won't take, so try a lower mode first. If none of the fuser's modes fit your monitor or second computer, EDID mode lets you set your own. If it still doesn't work, open a ticket in our Discord with your monitor model and both graphics cards. If your fuser is faulty, the three months of warranty cover it.
Three months on all of our hardware, and everything is tested before it ships. If a card, fuser or aim device arrives faulty or develops a hardware fault in that time, open a ticket in our Discord. Show us proof and we replace it. Software that won't talk to your hardware isn't covered, but open a ticket for that too and we will help.
We ship anywhere, free and tracked. Parcels ship in 1–2 days, not counting Sundays, and then delivery takes 7 to 10 working days, or 3 to 5 with $30 express. Customs and import fees depend on your country and you pay them if they're charged. If customs sends a parcel back, we reship it by express at no cost.
The full details are in our shipping, warranty and refund policies.
Reviews
+rep 3 day shipping faster then Amazon Prime I slept woke up and shit was at my doorstep delivery driver talking bout some where can I get some. Told him can’t leak
Helpful+rep I’ve received my bundle order… everything was perfectly packed… big vouch to @phantom
HelpfulBought another product from the goat @phantom 3 day shipping again got it quick and easy also still ud on #private best fw best hardware
Helpful


